0
You have no items in your shopping cart.

0

 

URETHANE BLADES

URETHANE BLADES

The Polyblade® impeller is the answer to the problems that may occur in metal dispersing blades. These impellers are made from a wide variety of polymers depending upon the application:

  1. Polyurethane for maximum abrasion resistance in a non-solvent slurry
  2. Anti-static polyethylene for solvent slurries
  3. Polytetrafluoroethylene (PTFE) for high temperature slurries
  4. Nylon for chemical resistance
  5. Polypropylene & PTFE for FDA and pharmaceutical applications
  6. Available sizes range from 1.25" and larger

Features of the Polyblade®:

  • Abrasion Resistance
  • Safety
  • Low Heat
  • Low Maintenance
  • No metal contamination
  • Won’t Bend or Deform
  • High Value

This unique design improves production time by efficiently pumping the material so that the slurry sees the shear zone of the blade more frequently than with any other style of blade. The batch will run cooler unless special heat enhancing scoops are requested. Lightweight materials are more easily incorporated. Heavy settling material is lifted off the bottom. This blade cannot be put on backwards. It will outlast metal and hard coatings 5-10 times longer. Best of all this blade never gets sharp and so a hazard is removed from the plant or lab.

Model Weight Price Qty
mf-6.5as-12
  • ZZ MF-6.5AS-1/2
Fawcett 6.5 Urethane Impeller
Fawcett 6.5 Urethane Impeller
More > Less
2.25
$425.00
mf-6.5as-58
  • ZZ MF-6.5AS-5/8
Fawcett 6.5 Urethane Impeller
Fawcett 6.5 Urethane Impeller
More > Less
2.25
$425.00